Corovent Tile & Slate Roofline Vents

Profiled Tile Roofline Vent RV10K/RP10K

Corovent Profiled Tile Roofline Vents are discreet interlocking tile vents that are almost invisible from the ground. Vents will be the same size as the tile it is matching with our bespoke tile matching service.

Downloads

Enquire about this product

features

Provides 10,000mm² of ventilation
Incorporates barriers to prevent water ingress
Tile matching service available
One felt sleeve (FW1) is supplied with each unit

ideal for

Roof pitches over 20°

guidance

Full installation details are available on request from the Technical Department.

Tile Vent Technical Data

Tile Vent	Ventilation Area	Airflow Resistance	Roof Pitches	Water Resistance
RV10K	10 000mm2	N/A	Over 20°	Exceeds all relevant parts of DoE Partners in Technology Programme
RP10K	10 000mm2	19.5 Pascals @ 30ltr/sec	Over 20°	Exceeds all relevant parts of DoE Partners in Technology Programme

Installation: Cowl or Roofline Vents for Tile Roof

Complete roofing to one course below the position for the tile vent.
Hold vent in position as centrally as possible between the rafters and mark where the vent spigot touches the underlay.
Cut underlay in a cross, fold up and back.
Insert felt weir, if using, under batten above opening, positioning it centrally above the hole.
Nail felt weir to the batten.
Nail felt over the battens.