 |
Ariel Plastics offers a superior range of Polycarbonate,
PVC & Bitumen, Roofing and Vertical Glazing
products, alongside a full range of accessories.
 |
|
 |
|
There are brochures available for some of our products.
They can be found on the following products page -
click
here.
You will need to have installed Adobe Acrobat on your
machine in order to read the documents as all product
brochures are in PDF format.
Click on the button below to download the software.
|
|
When cutting PVC sheet use a fine tooth saw at a
shallow angle, applying light pressure. The sheet
must be supported on each side to avoid cracking.
Follow these instructions when cutting across a Corotherm
sheet, when cutting parallel to the flutes a sharp
knife can be used. Follow the same procedure when
cutting Coroline; additionally lubricate the cut with
general purpose lubricating oil to prevent binding.
If you would like more information on handling our
products, try one of our product brochures available
on the following products page - click
here. |
|
| There are a number of fixings required for PVC sheets.
They are stated on a label on each individual sheet
as each profile and sheet size requires a different
amount of fixings. The frequency of the fixings is
indicated on the profile diagrams which is available
on the downloadable product brochures. |
|
Glues and paints should NOT be applied to sheets.
On Corotherm sheets use clear, neutral cure low modulus
silicone sealant.
If you would like more information on handling our
products, try one of our product brochures available
on the following products page - click
here. |
|
Onduline is suitable for roofing stables, garages,
sheds and agricultural buildings (structures which
do not require planning permission).
Installation details are available on the Coroline
brochure - available on the following products page
- click
here. |
|
You can find more information and details of your
local Stockists / Suppliers of Ariel Plastics products
in our Stockists section - Click
Here.
If you would like more information please contact
Pat Williams - Tel: 01246561106 or email us at info@arielplastics.com
stating the area that you are in, so that we can supply
details of your local stockists. |
|
A butyl flashing tape (150mm x 5m -76121)
is suitable for flashing up against many types of
surface, providing a watertight seal without the need
to dress into the wall. It is supplied in 5m rolls.
A breather tape (16mm x 10m - BSTP, 38mm x 10m - BVTP)
with a fabric membrane is available, which allows
free movement of air within the sheet structure to
prevent damage due to thermal expansion. It can be
used to seal along the outside edge of the sheet underneath
the end cap and is supplied in 10m rolls.
An aluminum tape (16mm x 10m - BMNO, 38mm x 10m - BZOP) used
to seal the top edge of the Corotherm sheet, preventing
the ingress of dirt, insects and algae is supplied
in 10m rolls.
More information on product accessories can be found
in our product information section - click
here. |
|
|
|
|
 |
|
|
| |
Ariel
Plastics Ltd
Speedwell Ind. Estate
Staveley
Derbyshire
S43 3JP |
|
|
|
 |
| |
 |
| |
 |
| |
|
