Corovent DVS Dry Verge System Newbuild

Starter Piece Brown

Starter Piece

Manufactured from UV stabilised and recyclable polypropylene, the Corovent Dry Verge System Starter Piece is available in both Grey and Brown.

features

  • 100% weatherproof
  • Maintenance free
  • Speeds on-site installation
  • Ultimate protection

ideal for

  • DIY Roofing Projects

guidance

Full installation details are available on request from the Technical Department.

Installation Guidelines

  1. Apply starting piece and slide the Dry Verge Unit (pointing towards the apex) until the Verge Unit butts against the end of the first tile. Screw the Verge Unit through the top and bottom holes, so that the screw penetrates the barge board or brick and firmly holds the Dry Verge in place.
  2. Clip together a second Dry Verge Unit and push it onto the tail of the first, until both sides of the clip engage with the tail fins of the first. Once again ensure the Verge Unit butts against the end of the tile. Then screw the tail end of the Verge Unit through the rear hole so it attaches to the barge board.
  3. Repeat instruction 2 until all tiles have been covered. Once the Left Hand Verge is completed, repeat on the opposite Verge using the Right Hand Verge Units. The Ridge Cap is then securely screwed into the dry verge. 

accessories

  • Dry Verge Left Hand Brown

    Dry Verge Left Hand

    Left hand piece of Corovent DVS Dry Verge System

    View product
  • Dry Verge Right Hand Grey

    Dry Verge Right Hand

    Right hand piece of Corovent DVS Dry Verge System

    View product
  • Ridge Cap Angled Grey

    Ridge Cap Angled

    End cap for use with Corovent DHS Dry Hip System

    View product
  • Ridge Cap Half Round Brown

    Ridge Cap Half Round

    End cap for use with Corovent DHS Dry Hip System

    View product
Open/close panel Customer service

Get in touch

Contact our customer service team
*
*
*
*
 
Captcha